FFS875S Form/Fold/Set Base Unit Specifications:
• Servo controlled base with interchangeable pleat & fold heads.
• Motor encoder used for diameter control.
• Omron PLC controller.
• Thermal compression control adjustable from 25 °C to 100 °C.
• Manual catheter handling system, V-block design.
• Catheter movement in “V” formation.
• Pleat and Fold Heads angled for “V” movement.
• Manual catheter clamp system with high strength magnets.
• Pleat and fold head guide funnels.
• Sensor activation.
• Pressure regulator control from 0 - 100 psi.
• Simpluer fitting.
• Vacuum control up to 600 mmHg.
• Pleat dwell timers 0 – 600 seconds per stage (4 stages).
• Interlock safety feature monitor halts the machine.
• Emergency stop.
• CE certified.

PLC Specifications:
• Software written with PLC Ladder Logic.
• Pleat head diameter stops to be programmable by the user.
• Vacuum/pressure delay time is programmable by the user.
• Pleat/fold head dwell time is programmable by the user.
• Pleat/fold force is monitored.
• Pleat/fold alarm is programmable by user.
• Pleat/fold open/close speed programmable by user.
• Option to use only pleat cycle selectable by user.

Pleat Head Specifications:
• One (1) Wavepleat™ head with customer specified pleat/segment design.
• LED heater junction box.

Fold Head Specifications:
• One (1) Folding mechanism with open diameter of 8.0 mm, 150 mm length.
• Ten segment heated stainless steel fold head design.
• LED heater junction box