Crimp
mechanism base plate specifications:
• Pneumatic crimp mechanism base with
interchangeable crimp head.
• Thermal control unit integrated into
base plate with over temperature control.
• Foot pedal and touch screen activation.
• Digital temperature control (25°C
to 100°C).
• Manual, V-block handling system.
• Manual catheter clamp system.
• Straight Luer fitting.
• Emergency stop.
• Micrometer stop for crimp diameter control.
• Pressure regulator for crimp pressure
control.
• Vacuum/pressure controlled by PLC and
flow control valve.
• Activation load cell.
• Crimp dwell timer (0 – 99.9 seconds).
• Electrical 110V/220V 50/60Hz.
• CE certified.
Crimp head specifications:
• One (1) stainless steel crimp head
with 50.0 mm maximum length.
• One (1) cartridge heater per crimp segment.
• LED heater junction box.
• Diameter capable of 0 - 5.0 mm.
• Twelve segment crimp head design.
PLC
User Interface Specifications:
• Software written with PLC Ladder Logic.
• Password protected areas: calibration
and maintenance.
• Load cell reading through PLC.
• 60 possible programs can be stored.
• Crimp dwell time is programmable by
the user.
• Crimp delay time is programmable by
the user.
• Interlock safety feature monitored by
the PLC and halts the machine.
