Crimp mechanism base plate specifications:
• Servo driven crimp mechanism base plate
with interchangeable crimp head.
• Thermal control unit integrated onto base
plate with over temperature protection.
• Foot pedal or Start Button activation.
• Digital temperature control (25 °C
to 120 °C).
• Manual, V-block handling system.
• Emergency stop.
• Balloon Pressure/Vacuum System with Simpluer™ connection.
• Balloon pressure system up to 100 psi with
high resolution readout.
• Crimp activation load cell (0 – 200lbf.).
• Crimp dwell timer (0 – 999 seconds
for each stage) with four stages standard.
• External encoder for diameter readout.
• Electrical 110V 50/60Hz.
• CE certified.
Crimp head specifications:
• One (1) Stainless Steel crimp
head with 60.0 mm length.
• Operating Temperature – 0.0
to 120°C.
• One (1) cartridge heater per
crimp segment.
• LED heater junction box.
• Diameter capable of 0 –10
mm maximum.
• 12 Segment
crimp head design.
PLC Specifications:
• Software written with PLC Ladder Logic.
• Password protected areas: calibration and
maintenance.
• Load cell reading through PLC.
• 100 possible programs can be stored.
• Crimp dwell time is programmable by the
user.
• Close / Open speeds programmable by user.
• Interlock safety feature monitored by the
PLC and halts the machine.
• Vacuum/pressure sequence controlled by
PLC.
• Setup (units): Units can be customer specified.
Base Options:
• Dual Simpluer™ Pneumatic Connector.
• Trigger
output for USON leak detection.
• USON leak detection
integrated into Simpluer connection.
• Automated
Handling System.
• Vision Alignment System X10 Zoom
17” LCD.
• Dual axis laser micrometer for
crimp profile measurement.
• Automatic heater failure
detection system.
• Automated product handling
system with rotation utilizing servo motor
system (0 ° to 360 ° adjustable).
