• Heater Controls: The Microswirl 360° thermal nozzles are controlled independently with the ability to run the machine with 1 to 4 heaters in operation.
• Heater nozzles utilize expanded metal technology along with baffling to produce an even temperature distribution around the ID circumference.
• Independent temperature and flow controls for each nozzle.
• Forced air heater assembly: The forced air heaters have an operating range of 30-700°F with a tolerance of ±5°F.
• Heater assembly traversing is accomplished using a linear slide driven with a stepper motor. Max speed of 100mm/sec.
• Flow meters with built in flow control valve allowing accurate heater airflow control and monitoring.
• Adjustable chuck assembly loading height.
• Chuck Assembly: Chuck has a working diameter of 0.010”- 0.130” without tooling changes.
• Castering wheels with levelers.
• Aluminum extrusion modular frame with PVC and SS panels which are incorporated into the rear sub-panel to reduce heating the surrounding environment.
• A 4” duct connection is provided on the rear machine panel.
• Customer will provide the blower and ducting required for connection and exhausting from manufacturing environment.
• Standard product length 175cm, minimum product length 5cm. Custom lengths available.
• Compressed air requirement 100psi at 13cf/min.
• 240 VAC.
• CE Marked.
PC Specifications:
• Industrial style PC contained inside electrical enclosure with touch screen interface.
• An arm assembly secures the monitor for ergonomic placement by the technician.
• Control Code Written in Microsoft Visual Basic™ 6.0.
• The software allows multiple traverse speed and distance relationships to be set.
• Profiles can be stored for future product runs.
